Yueqing Shuoer Electric Co., Ltd.
Main products:Switching Power Supply,Relay
Products
Contact Us
  • Contact Person : Ms. WANG INA
  • Company Name : Yueqing Shuoer Electric Co., Ltd.
  • Tel : 86-577-62707673,13968766226
  • Fax : 86-577-62707672
  • Address : Zhejiang,YUEQING,GAOQIAN VILLAGE,XIANGYANG TOWN,YUEQING CITY
  • Country/Region : China

100W Single Output Switching Power Supply

100W Single Output Switching Power Supply
Product Detailed
100W Single Output Switching Power Supply *High efficiency,low cost power supply *4.2a 24v,8.5A 12v switch power supply

100W Single Output Switching Power Supply

SPECIFICATIONS 
  
INPUT 
Voltage Range88~132 VAC/176~264VAC 47~63 Hz;selected by switch 248~370VDC
AC Current3.15A/115 V 1.5A/ 230 V
Efficiency76%(LS-100F-5);      78%(LS-100F-7.5);    80%(LS-100F-12);    81%(LS-100F-15);83%(LS-100F-24);    83%(LS-100F-27);     84%(LS-100F-48);
Inrush CurrentCold start 30A/115V 60A/230V
Leakage Currentsmaller than 1 mA/240VAC
  
OUTPUTSee Datasheet
  
PROTECTION 
Over Load135%~165%
 Protection type: Shut down o/p voltage, recovers automatically after fault condition is removed.
Over Voltage115%~135%
 Protection type: hiccup mode, recovers automatically after fault condition is removed.
  
ENVIRONMENT 
Working Temp., Humidity-10°C~+60°C;20%~90 %RH
Storage Temp., Humidity-20°C~+85°C;10%~95 %RH
Vibration10~500Hz,2G 10min./1cycle,period for 60 min, each along X, Y, Z axes
  
SAFETY 
Withstand VoltageI/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
  
STANDARD 
Safety StandardDesign refer to UL1012TUV EN60950
EMC StandardDesign refer to EN55022,EN61000-3-2,-3;EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024
  
OTHERS 
Weight0.65Kg
Packing20pcs/14.2Kg/0.72CUFT
  
NOTE1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ   parallel capacitor.
 3.Tolerance: includes set up tolerance, line regulation and load regulation
 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must    be re-confirmed that it still meets EMC directives.
  
OUTPUT 
ModelLS-100F-5LS-100F-7.5LS-100F-12LS-100F-15LS-100F-24LS-100F-27LS-100F-48
DC Voltage5V7.5V12V15V24V27V48V
Voltage Tolerance±2%±1%±1%±1%±1%±1%±1%
Rated Current20A13.5A8.56.7A4.5A3.5A2.2A
Current Range0-20A0-13.5A0-8.5A0-6.7A0-4.5A0-3.5A0-2.2A
Rated Power100W101W102W100.5W108W94.5W105.6W
Ripple & Noise100 mVp-p125 mVp-p125 mVp-p125 mVp-p150 mVp-p150 mVp-p150 mVp-p
DC Adjustment Range±10%±10%±10%±10%±10%±10%±10%
Setup,Rise,Hold Time1s,30ms,15ms at full load

100W Single Output Switching Power Supply



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.