25W Single Output Switching Power Supply, SMPS
*High efficiency,low cost SMPS
*professional switching power supply manufacture
25W Single Output Switching Power Supply
SPECIFICATIONS | | | | INPUT | | Voltage Range | 85~264 VAC 47~63 Hz;120~370VDC | AC Current | 0.6 A/115 V0.35A/ 230 V | Efficiency | 72%/115VAC(SKS-25-5); 76%/115VAC(SKS-25-12); 77%/115VAC(SKS-25-15); 80%/115VAC(SKS-25-24); | Inrush Current | Cold start 15A/115V30A/230V | Leakage Current | smaller than 0.75 mA/240VAC | | | OUTPUT | See Datasheet | | | PROTECTION | | Over Load | 110%~160% | | Protection type: Fold back current limiting, recovers automatically after fault condition is removed. | Over Voltage | 115%~135% | | Protection type: hiccup mode, recovers automatically after fault condition is removed. | | | ENVIRONMENT | | Working Temp., Humidity | -10°C~+60°C;20%~90 %RH | Storage Temp., Humidity | -20°C~+85°C;10%~95 %RH | Vibration | 10~500Hz,2G 10min./1cycle, period for 60min, X, Y, Z each along axes | | | SAFETY | | Withstand Voltage | I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC | Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | | | STANDARD | | Safety Standard | Design refer to UL1012, TUVEN60950 | EMC Standard | Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5;ENV50204,EN55024 | | | OTHERS | | Weight | 0.39Kg | Packing | 45pcs/18Kg/0.9CUFT | | | NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | | 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ parallel capacitor. | | 3.Each output can within current range. But total output power can’t exceed rated load. | | 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | | | OUTPUT | |
|
Model | LS-25-5 | LS-25-12 | LS-25-15 | LS-25-24 | DC Voltage | 5V | 12V | 15V | 24V | Voltage Tolerance | ±2% | ±1% | ±1% | ±1% | Rated Current | 5A | 2.1A | 1.7A | 1.1A | Current Range | 0-5A | 0-2.1A | 0-1.7A | 0-1.1A | Rated Power | 25W | 25.2W | 25.5W | 26.4W | Ripple & Noise | 50 mVp-p | 100 mVp-p | 100 mVp-p | 100 mVp-p | DC Adjustment Range | -5%, +10% | ±10% | ±10% | ±10% | Setup,Rise,Hold Time | 800ms,50ms,10ms/115VAC300ms,50ms,80ms/230VAC at full load |
|
25W Single Output Switching Power Supply